NJP Capsule Filling Machine Full Automatic For Powder Pellet Pharmaceutical

NJP Capsule Filling Machine Full Automatic For Powder Pellet Pharmaceutical

รายละเอียดผลิตภัณฑ์โดยละเอียด
ความจุ	24,000 ชิ้น/ชม
น้ำหนักสุทธิของเครื่อง	600.00 กก
ขนาดโดยรวมของเครื่อง	805×705×1760(มม.)
พลัง	100-400V 50/60Hz
กำลังทั้งหมด	3.5กิโลวัตต์
เครื่องดูดฝุ่น	20ลบ.ม./ชม-0.04-0.08MPA
เสียงรบกวน	<75ดีบี(ก)
แคปซูลที่ใช้งานได้	00,0,1,2,3,4,5#
ผลิตภัณฑ์ที่ใช้งานได้	พลัง,เม็ดเล็ก,เม็ด,แท็บเล็ต

 

 

NJP Powder Capsule Filling Machine 400C NJP is easy to clean, 0 dirt is one of its strengths, it is very environmentally friend and very economical. This machinery can work efficiently from morning to night under the conditions of continuous working, and it can run with no noise. So, all kinds of fill rods are easy for changing and have 0 deviation to ensure the quality of the capsules without any damage.
The adjustment working and war of the gap between the dosing disc and the sealing ring of the automatic hard capsules filling machine. The gap between these dosing disk and the sealing rings of the automatic capsule filling machine are 0.03 to 0.08mm. When the powder granules are large, the interval can be adjusted to be bigger . If the gaps are too small, the resistance between the dosing disk and the sealing ring would increase. During the operating of the fully automatic capsule filling machinery, it is necessary to adjust the gap when too much powder leakage.
Automatic filling capsule machine adjustment method: loosen and remove the 5 screws on the baffle, turn the five adjusting bolts evenly and careful in turn to adjust the height of the sealing rings, check it with the feeler gauge For gaps, check three to five measuring points, the gaps at every point should be consistent, and make sure that the five adjusting sleeves are in contact with the sealing ring.