NJP Capsule Filling Machine Full Automatic For Powder Pellet Pharmaceutical
Detaillierte Produktbeschreibung. Kundendienst bereitgestellt:Ingenieure stehen für die Wartung von Maschinen im Ausland zur Verfügung,Technischer Video-Support,Online SupportCapsule Size:000 00 0 1 2 3 4 5Stromspannung:220V/380V 50HzCondition:Neues Gewicht:600KGDimension(L*B*H):805*705*1760 MmType:Abfüllmaschinenanwendung:Medizinisch,FoodA…
- Voraussichtliche Lieferung : 7 Tage schnelle Lieferung
- Zertifizierung : CGMP CE ISO SGs usw.
- After-Sales zur Verfügung gestellt : Ingenieure für Service -Maschinen in Übersee zur Verfügung stehen.
| Detaillierte Produktbeschreibung | |||
|---|---|---|---|
| Kundendienst bereitgestellt: | Ingenieure stehen für die Wartung von Maschinen im Ausland zur Verfügung,Technischer Video-Support,Online-Support | ||
| Kapselgröße: | 000 00 0 1 2 3 4 5 | ||
| Stromspannung: | 220V/380V 50Hz | ||
| Zustand: | Neu | ||
| Gewicht: | 600KG | ||
| Dimension(L*B*H): | 805*705*1760 Mm | ||
| Typ: | Füllmaschine | ||
| Anwendung: | Medizinisch,Essen | ||
| Automatische Note: | Automatisch | ||
| Angetriebener Typ: | Elektrisch | ||
| Highlight: |
Capsule Filling Machine Full Automatic, 24000Stück/h Kapselfüllmaschine, Kapselpulverfüllmaschine |
||
NJP Capsule Filling Machine Full Automatic For Powder Pellet Pharmaceutical
| Detaillierte Produktbeschreibung | |||
|---|---|---|---|
| Kapazität | 24,000 Stk/h | ||
| Nettogewicht der Maschine | 600.00 Kg | ||
| Gesamtgröße der Maschine | 805×705×1760(mm) | ||
| Leistung | 100-400V 50/60Hz | ||
| Gesamtleistung | 3.5KW | ||
| Vakuum | 20m3/h-0.04-0.08Mpa | ||
| Lärm | <75DB(A) | ||
| Anwendbare Kapsel | 00,0,1,2,3,4,5# | ||
| Anwendbares Produkt | Leistung,Körnchen,Pellet,Tablette | ||
NJP Powder Capsule Filling Machine 400C NJP is easy to clean, 0 dirt is one of its strengths, it is very environmentally friend and very economical. This machinery can work efficiently from morning to night under the conditions of continuous working, and it can run with no noise. So, all kinds of fill rods are easy for changing and have 0 deviation to ensure the quality of the capsules without any damage.
The adjustment working and war of the gap between the dosing disc and the sealing ring of the automatic hard capsules filling machine. The gap between these dosing disk and the sealing rings of the automatic capsule filling machine are 0.03 to 0.08mm. When the powder granules are large, the interval can be adjusted to be bigger . If the gaps are too small, the resistance between the dosing disk and the sealing ring would increase. During the operating of the fully automatic capsule filling machinery, it is necessary to adjust the gap when too much powder leakage.
Automatic filling capsule machine adjustment method: loosen and remove the 5 screws on the baffle, turn the five adjusting bolts evenly and careful in turn to adjust the height of the sealing rings, check it with the feeler gauge For gaps, check three to five measuring points, the gaps at every point should be consistent, and make sure that the five adjusting sleeves are in contact with the sealing ring.
