آلة تعبئة الكبسولة NJP أوتوماتيكية بالكامل لمسحوق الحبيبات الدوائية

آلة تعبئة الكبسولة NJP أوتوماتيكية بالكامل لمسحوق الحبيبات الدوائية

وصف المنتج التفصيلي
سعة	24,000 PCS/H.
الوزن الصافي للآلة	600.00 كجم
الحجم الكلي للآلة	805×705×1760(مم)
قوة	100-400V 50/60Hz
إجمالي الطاقة	3.5كيلوواط
مكنسة	20م3/ساعة-0.04-0.08الآلام والكروب الذهنية
ضوضاء	<75ديسيبل(أ)
كبسولة قابلة للتطبيق	00,0,1,2,3,4,5#
منتج قابل للتطبيق	قوة,حبيبة,بيليه,قرص

 

 

NJP Powder Capsule Filling Machine 400C NJP is easy to clean, 0 dirt is one of its strengths, it is very environmentally friend and very economical. This machinery can work efficiently from morning to night under the conditions of continuous working, and it can run with no noise. So, all kinds of fill rods are easy for changing and have 0 deviation to ensure the quality of the capsules without any damage.
The adjustment working and war of the gap between the dosing disc and the sealing ring of the automatic hard capsules filling machine. The gap between these dosing disk and the sealing rings of the automatic capsule filling machine are 0.03 to 0.08mm. When the powder granules are large, the interval can be adjusted to be bigger . If the gaps are too small, the resistance between the dosing disk and the sealing ring would increase. During the operating of the fully automatic capsule filling machinery, it is necessary to adjust the gap when too much powder leakage.
Automatic filling capsule machine adjustment method: loosen and remove the 5 screws on the baffle, turn the five adjusting bolts evenly and careful in turn to adjust the height of the sealing rings, check it with the feeler gauge For gaps, check three to five measuring points, the gaps at every point should be consistent, and make sure that the five adjusting sleeves are in contact with the sealing ring.